A quick, affordable security upgrade for your cabinets, boxes, lockers & more!
Electronic cabinet lock offers a cost-effective and easy retrofit for standard cam locks.
Create immediate access control! Lock can also be fitted onto cabinets without a locking device already fitted. Just drill a 16mm hole for the spindle and install the lock.
Features an updated five-button, 10-keypad and a # button, which is used when programming. When closed, the # button is covered by the lever.
All codes are 4 digits.
Supplied with all the necessary materials, template and operating instructions, to fit and operate.
Features three program levels:
Master code can: Open the lock/change the master code-set/change/delete the sub-master and user code. The master code can also be used to put the lock into two modes of operation. * Multiple user code mode (for cabinets) in this mode, the user code can be repeatedly used to open the lock. This is the default setting. * One time user code mode (for shared lockers) in this mode, the lock can be locked & opened once before the code is erased for the next user to enter a new code. This is typically used in the lockers that will have multiple short-term occupancy, such as a Gym locker.
Sub Master code can: Open the lock/change the sub-master-set/change/delete the user code.
User code can: Open the lock/change the user code. Acceptance or rejection of a code are indicated by the blue and red LED's. Red LED blinks once every 5 seconds to indicate locker is in use
Powered by two 1.5-volt AAA batteries to provide in excess of 15,000 openings. Batteries are included.
Low battery warning! Red LED flashing indicates low battery. Lock will open 100 more times after signal is initiated.
Spindle size: 3/8"
Silver/Gray finish.
Dimensions: 1-1/4"W x 5-3/8"H x 1-3/16"D (33mm x 136mm x 30mm)
